Molde de cartulina para letras 3D(tutorial)/Mold of cardboard for 3D letters(tutorial)

in GEMSlast month

Hola 😊

Hoy les traigo algo diferente a la costura, una manualidad con cartulina, hice unas letras con la cartulina de unas fichas escolares.

Hello 😊 today I bring you something different to sewing, a craft with cardboard, I made some letters with the cardboard of some school cards.


img_0.011881006193748255.jpg

Es una ficha bibliográfica que utilizan para exponer, en cada ficha hice una letra, las hice de 17 cm de alto, 10.5 cm de ancho y el grosor de la letra es de 3.5cm de largo
Tienes que hacer cada letra dos veces y tienen que tener la misma medida, Luego que haces la letra tienes que dejar 1 cm para la pestaña, que es la que van a utilizar para unir cada letra.

It is a bibliographic card that they use to expose, in each card I made a letter, I made them 17 cm high, 10.5 cm wide and the thickness of the letter is 3.5 cm long.
You have to do each letter twice and they have to be the same size, after you do the letter you have to leave 1 cm for the tab, which is the one they are going to use to join each letter.


img_0.6111108785170515.jpg

Después vas hacer la tira, que sera el grosor de la letra, que es la que vas a utilizar para unirlas y para que se puedan quedar paradas, esa tira mide 3.5cm.

Then you will make the strip, which will be the thickness of the letter, which is what you will use to join them together and so that they can stand, that strip measures 3.5cm.


img_0.18351026964384817.jpg

Y el paso final es pegar, pero este paso también tiene su dedicación, porque tienes que ir marcando cada esquina de la letra en la tira, para marcar con la tijera y que se te haga fácil doblar la tira para que se vaya amoldando a la letra.

Luego si quieren, decoran las letras como ustedes quieran, con pintura, foami, cartulinas, etc.

Así quedaron las mías:

And the final step is to paste, but this step also has its dedication, because you have to go marking each corner of the letter in the strip, to mark with the scissors and make it easy to fold the strip to fit the letter.

Then if you want, you can decorate the letters as you like, with paint, foami, cardboard, etc.

That's how mine are:


img_0.4855436255202213.jpg


  • Todas las fotos son de mi propiedad.
  • Edité las fotos con la app PicsArt
Sort:  

Congratulations @dayna199019! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 50 upvotes. Your next target is to reach 100 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @hivebuzz:

Hivebuzz support the Papillon Foundation Charity project